Mercedes-Benz Metris Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
We installed these swivel seats yesterday. They weigh 46 pounds each and are well made. I took it Fleet Upfitters Company in Raleigh (FUSCo) to install a hitch and they installed the swivels on their dime. I’ll probably turn to them to install sliding windows and the auxiliary battery.
http://www.eurocampers.com/2016--20...ription-for-correct-fit--In-Stock_p_2518.html
It required drilling out one of the holes about a sixteenth of an inch.
Backward movement of the seat is shortened two inches.
You must adjust the backs and slide the seats somewhat to turn them around
The doors close with the seats turned 90° facing each other.
The seats turn 90° facing the doors as well.
They lock only on the forward position.











 

·
Registered
Joined
·
305 Posts
> Backward movement of the seat is shortened two inches.

Wow, that would be a total no go for me. I removed the partition in my cargo van just to get the extra inch or so
 
G

·
Discussion Starter · #3 ·
I overstated that somewhat until I got a closer measurement. It does not affect us, but I dislike losing options. How many inches did the removal give you?
 

·
Registered
Joined
·
305 Posts
How many inches did the removal give you?
I didn't measure. But, more than just being able to slide the seat all of the way back, removing the cargo partition allows the seat back to recline a bit more so I wasn't forced to sit quite so straight up.
 
1 - 4 of 4 Posts
Top